Shop headings: New Spares | Used Spares | Accessories | Brands
Round 12v two pin flasher relay for LED indicators. For use with aftermarket LED indicators
Includes rubber for attaching to bike.
NB Only suitable for LED indicators. Will not work in modern V7 models because these do not utilise a flasher unit.
This part is available by special order, request a quote
£12.00
INC VAT
£10.00 EX VAT
Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT
Replacement solenoid for original Bosch starter motor.
Note that this solenoid has a bright zinc finsh
This part is due back in stock soon, call 01484 841395 to reserve yours
14730554 GU14730554 14 73 05 54
1473 0554 1473.0554 14.73.05.54
£37.50
INC VAT
£31.25 EX VAT
Ignition switch bracket, attaches to top frame tube
See ELA17735 for ignition switch
This part is available by special order, request a quote
17736450 GU17736450 17 73 64 50
1773 6450 1773.6450 17.73.64.50
£45.00
INC VAT
£37.50 EX VAT
Replica fuse box cover with clear lid and securing screw.
This part is due back in stock soon, call 01484 841395 to reserve yours
17743000 GU17743000 17 74 30 00
1774 3000 1774.3000 17.74.30.00
£8.80
INC VAT
£7.33 EX VAT
Permanent replacement for unreliable condensers. This capacitor replaces both condensers with a single unit that should never need to be replaced
Earths through supplied bracket, can be mounted inside distributor. Fit and forget reliability. 1 required
This part is due back in stock soon, call 01484 841395 to reserve yours
14715433 GU14715433 14 71 54 33
1471 5433 1471.5433 14.71.54.33
£42.00
INC VAT
£35.00 EX VAT
Pair of high performance Dyna 12 volt 5 ohm dual lead ignition coils with angled HT lead socket. These are a performance coil which offer improved starting and performance for twin plugged models
Dyna Performance Replacment twin plug coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount. Guzziology recommends using electronic ignition with these coils as points may not be up to triggering these coils. See ELA00001 for crimp on HT lead connector.
Individual coils available by special order, call us for details
This part is available by special order, request a quote
1471650
£190.00
INC VAT
£158.33 EX VAT
Complete Newtronic electronic ignition kit containing ignition pickup (distributor mounted) and ignition box. Retains original mechanical advance / retard mechanism.
Kit consists of sensor plate and pickups, magnet, ignition box, clip, screws and instructions.
Suitable for all models originally fitted with points which have a mechanical advance / retard . Can also be fitted to Strada 1000, Spada 3, Cali 3 etc... if the distributor is swapped for a points type part with advance / retard mechanism. Coils should have 4 Ohms resistance on the low tension circuit, OE coils will work OK but you may see improved results with high performance Dyna coil ELA14101
Developed from the original Piranha system, Newtronic ignitions are contact breaker replacement ignition systems covering a range of Japanese and European motorcycles from the late 1950's onwards. Using contactless, maintenance free, infra red triggering the Newtronic ignition has gained a reputation for ease of installation and effectiveness from satisfied motorcyclists around the World. The switching units include an integrated timing LED for each channel, making it quick and easy to accurately time each cylinder independently (an essential step in gaining the best performance from your engine.). The system typically consists of three main components:
This part is due back in stock soon, call 01484 841395 to reserve yours
£225.00
INC VAT
£187.50 EX VAT
Alternator upgrade kit for Bosch systems containing stator windings, wound rotor and replacement diode board. The superior design alternator has an output up to 300% greater than the original Bosch system. You may wish to fit a plastic alternator spacer ENA18150 if your model does not have one of these already (to improve cooling of the alternator). You will need front crank seal ENA90428 (Bosch seal) if you wish to fit this to a bike with a Saprisa charging system. This kit reuses your existing Bosch regulator and stator plate with brush holder, see ELA29703 for a replacement regulator and ELA17452 for brush holders.
This part is available by special order, request a quote
£465.00
INC VAT
£387.50 EX VAT
CEV type indicator switch. Supplied without wires, you will need to solder your wiring into the switchgear using a minimum 60W soldering iron. Switch fixes to handlebars using included screws
Can be fitted to left or right side of bars
This part is due back in stock soon, call 01484 841395 to reserve yours
12750300-z 12750300 GU12750300 12 75 03 00
1275 0300 1275.0300 12.75.03.00
£55.00
INC VAT
£45.83 EX VAT